Option D Graphics
Option D Graphics Banner
Coroplast

Our most econimical sign board! Lightweight rigid plastic most popular for yard signs. Composed of plastic flutes simulating "plastic cardboard" this material makes for excellent temporary single or double sided signs, yard signs, construction signs and wall signs. We print all of our coroplast with latex inks on a matte white blockout vinyl. Our double sided signs do not bleed through on both sides. Due to the nature of this product you will see the corrugation texture on both sides of the printed product. From a short distance this goes away. Since the material is hollow we sell stakes that fit in-between the corrugations. We offer coroplast in 4mm(most common), 6mm and 10mm thicknesses. Our most popular stake is a 30" "H" style stakes. Also available are 36" or 48" tall single arm stakes, where the image starts 36" or 48" above ground level, and heavy duty stakes for 4, 6 and 10mm thicknesses. Common sizes for this material are 18" x 24", 24" x 24" and 24" x 36"

 

Fomecor

 

This material is used only for indoor signs that have limited exposure to sunlight or heat. We offer both white and black 3/16" thick fomecor. Being extremely lightweight, this material is great for displaying on easels or hanging from ceilings. This product has a much lower cost compared to Ultraboard. All of our fomecor is printed with latex inks on a matte white surface. We can print this single or double sided. Their is no image bleed through due to the complete opacity of the board. Printed boards are smooth with no visible texture. Lamination is not required, however many of our clients matte laminate this product so it can be transported safely and cleaned in high traffic areas where it may be touched repeatedly. Common sizes for this material are 24" x 36".

 

Ultraboard(gator)


Very similar to Fomecor, Ultraboard has plastic faces in stead of paper faces. This makes the material lightweight, but more rigid and durable. Since this board is a bit tougher than fomecor, the 3/16" thick board can be used for limited outdoor exposure where the 1/2" board is suitable for full outdoor exposure. We offer this material in both black and white finishes in 3/16" or 1/2" thickness. Most easel signs are made with 3/16" boards. A popular application for the 1/2" board is a freestanding floor directory with a weighted base(also available). All of our ultraboard is printed with latex inks on a matte white surface. We can print this single or double sided. Their is no image bleed through due to the complete opacity of the board. Printed boards are smooth with no visible texture. Lamination is not required, however many of our clients matte laminate this product so it can be transported safely and cleaned in high traffic areas where it may be touched repeatedly. Common sizes for the 3/16" board is 24" x 36". Common sizes for the 1/2" board floor displays are 24" x 72", 36" x 84" and 48" x 96".

 

PVC


Excellent for indoor or outdoor wall signs, sign displays and counter top displays. We offer 2 thicknesses of this product in both black and white sheets. PVC is completely waterproof and weathers well. Our 1/8" thick(3mm) pvc is used for real estate signs, sign displays, wall signs, counter top signs, hanging signs and easels. Our 1/4" thick(6mm) pvc is used for pole signs, counter top signs where additional weight is needed, wall signs and even easels as a heavyweight option when slight breezes are an issue. PVC has a unique property when heated it can be bent to make wall signs hinge out or table top sign get an "A-frame" shape. All of our pvc is printed with latex inks on a longterm outdoor grade vinyl. We can print this single or double sided. Their is no image bleed through due to the complete opacity of the board. Printed boards are smooth with no visible texture. All of our pvc signs get your choice of a gloss UV or matte UV lamination. We can also corner round this product making it safer in public spaces. Common sizes for the 1/8" board is 8.5" x 11", 18" x 24", 20" x 30", 24" x 36". Common sizes for the 1/4" board for floor displays are 8.5" x 11", 22" x 28" and 24" x 36"

 

ACM(dibond)


ACM stands for Aluminum Composite Material. This is our alternative to 100% aluminum signage. Aluminum must be cut with a metal shear, where ACM can be cut with a panel saw making it very popular. ACM is 1/8" thick with thin aluminum faces and a poly core. This material is rigid, medium weight, weathers very well, holds up as long or longer than aluminum due to it's extra thickness at 1/8"(compared to .063" or .080" aluminum). Common uses are pole signs, wall signs, job-site signs, real estate signs and pool area signs. ACM leaves sharp edges which we take down to an acceptable level of smoothness. All of our ACM is printed with latex inks on a longterm outdoor grade vinyl. We can print this single or double sided. Their is no image bleed through due to the complete opacity of the board. Printed boards are smooth with no visible texture. All of our ACM signs get your choice of a gloss UV or matte UV lamination or Vandal Resistant UV lamination, smoothed out edges and 1/4" rounded corners. Common sizes are 12" x 18", 18" x 24", 24" x 48", 48" x 48" 48" x 72", 48" x 96".

 

MDO


This is tough stuff. MDO is a weather resistant 1/2" plywood board with resin coated sign-faces. What makes this product stand out is it's ability to outlast other sign board substrates. Common uses for MDO is real estate signs, temporary job-site signs, post and panel signs, long term outdoor signage, wall signage and storefront signage. All of our MDO are printed with latex inks on a longterm outdoor grade gloss vinyl. We can print this single or double sided. Their is no image bleed through due to the complete opacity of the board. Printed boards are smooth with no visible texture. It is important to note, on this product we usually print this single sided and edge wrap 2" to 3" of the graphic around the edge to the back side of the board. This leaves the resin coated brown finish visible on the backside but completely seals in the raw edges of the sheet, making it water and weather proof. All double sided boards are edge painted by hand, water and weatherproofing the entire graphic edge to a sealed plywood edge. All of our MDO signs get your choice of a gloss UV or matte UV lamination or Vandal Resistant UV lamination. Common sizes are 48" x 48", 48" x 72", 48" x 96".

Acrylic & Lexan

 

Acrylic and lexan are used for completely different sign types. Acrylic signage is clear, 1/8" or 1/4" thick, polished edges and has print on the backside of the material(2nd surface). We print the graphics on clear vinyl, then mount to the backside of the acrylic. Graphics are then followed up with a full sheet of white vinyl to properly display the printed color. This makes the acrylic a clear/white. The graphic is on the back leaving the face pristine. We can pre-drill holes to accept a stand-off type installation. Acrylic although elegant, if broken or chipped leaves sharp edges and pieces that is dangerous. Acrylic can never be cleaned with solvents or alcohol. Doing so will cause the material to fracture beyond repair. There is no normal size with acrylic. We can accommodate most requests.

 

Lexan(as shown in pic) is exclusively used for backlit signage. It offers better UV and heat stability and does not break into sharp pieces when broken. Backlit lexan is milky white in color to aide in the dissipation of light across its surface. It has a smooth face and comes on rolls to accommodate large sign-faces. All of our Lexan signage is printed on long term outdoor grade translucent vinyl, with a matte UV lamination. We latex print our Lexan which offers excellent color saturation and dense blacks. Once Lexan has had a graphic on it the panel can't be used or turned inside out to be used again. Unfortunately the sun bleaches and weathers the panel making the old graphics fade through the new graphic. Sizing is based on a "perfect" measurement of the existing sign panel.